Hazardous waste containers and storage areas are designed with specific intent. The container is for holding the waste and the storage area is to prevent escape of release from a container. The regulations intend to ensure that wastes are,
One of the first things to make sure of is that your containers are in good condition. Containers that are deteriorating or leaking must not be used and waste must be removed or transferred from the defective containers.
After making sure your containers are in good shape, you must make sure that the container type is compatible with the type of waste held within. The term incompatible waste refers to a hazardous waste which is unsuitable for placement in a container because it may cause damage to the container or inner liner; or when mixed with other waste in the container under uncontrolled conditions might produce:
Containers used to store hazardous waste must be made of or lined with materials that will not react with the waste and are otherwise compatible with the waste. Incompatible waste must not be placed in the same container. This includes unwashed containers that previously held an incompatible waste or material.
It is not just in containers that you must think of compatibility, though. Incompatible wastes are to be kept separate from each other in storage. Incompatibles must be kept separate by dike, berm, wall, and separated by sufficient distance. It helps to remember the 2 row minimum rule. Incompatible materials must be 2 rows apart, separated by a row compatible to both.
Compatibility is so important because accidentally mixing incompatible wastes can have very dangerous ramifications. Always be sure to check and double check that you are not inadvertently mixing incompatible wastes. And remember, this information may not be all-inclusive and it is always best to check 40 CFR and your state regulations for the most up-to-date information. Keep reading our blog for more information about containerized wastes.
VP of Health and Safety Jim Mangas discusses the importance of plant safety, maintenance, and reliability (featured in BIC Magazine July/Aug '22)
Highlighting some of the wonderful interns we have at Heritage this year!
In this blog we walk you through the process of fuel blending, where we can turn hazardous waste materials into a viable alternative fuel source.
Our 12th annual Habitat for Humanity Build
On August 28th, 2021, the Louisiana coast was battered by Hurricane Ida. This included our Port Fourchon Service Center, where the devastating hurrica
Heritage Thermal Services is pleased to announce that its collection of household hazardous wastes for the East Liverpool area returns for 2022.
VP of Health and Safety Jim Mangas discusses preparedness for unexpected conditions during a project. (featured in BIC Magazine March/April '22)
Rachel McGrogan speaks about her time as a Lab Chemist at Heritage.